1. Record the video
Record your video on any recording device (camcorder, mobile device, etc.) See our list of Supported formats if you need more information on video formats. Files can be up to 2GB or 90 minutes in length, maximum. Note: You'll want to record in standard definition (480p resolution), so you don't create an unnecessarily large file to upload. If your device doesn't allow you to set it as low as 480p or SD set it to the next lowest resolution available. See our Video recording checklist for details, and for tips on best practices when recording.
If you recorded using a non-connected device (such as a camcorder), transfer your video to your computer.
2. Select an activity
Select the activity you wish this video to belong to in the lower left panel of the dashboard.
3. Click "Add Video" on your GoReact dashboard
Open your GoReact dashboard on a browser (computer or mobile), open the correct activity on the left, and click the Add Video button in the middle of your dashboard. From here you can add a title to your video and add or remove presenters. Once you title your video (optional), click "Upload" and then select your video by clicking the "Choose a File" button or link your video from YouTube.
4. Complete the upload.
Once selected, your video will now upload. This may take some time, depending on your video file size and your internet connection speed. After it uploads, you will see it processing (may also take a few minutes) Make sure to press "Save". Once complete, you will receive an email confirmation that your upload was successful.
UPLOAD ERROR MESSAGES:
If you are receiving an error on your upload, the error will tell you if the file was too big or if it failed to process due to an unsupported format. See our list of Supported formats as well as Converting/Compressing a video for more information if you need to re-save your video in an acceptable size/format.
If you are getting a message that says "Shucks! Check your computer's time . . .," it is most likely because your computer's time is not set according to your location. To check this, navigate to your computer's clock settings and make sure they are set to automatically set your Time Zone, Time, and change for daylight savings.
If your file consistently fails but is a supported format within the file size limit, it is very likely due to a poor internet connection. GoReact requires a minimum, consistent upload speed of 0.5Mb/s (separate from your download speed). For devices that support Flash, you can check your upload speed by going to www.speedtest.net and clicking the "Begin Test" button. When the test completes, your upload speed will be shown in the top right corner of the test results. If your indicated speed is less than 0.5Mbps you will most likely be unable to upload your file and will need to try again on a different network or internet connection.